Adverrun XS Contra Drive V3

adverrun-xs-v3
This drive comes with an EGODRIFT 4025HT Beta Series 550KV motor fitted. New from Adverrun is the AVR XS V3. It features a more rigid structure to improve belt wear. It also has a new main gear design to reduce noise. The drive also features grub screws in both the pinion and small pulley. Th ...Read more
AUD2,135.00 (AUD1,940.91 excl GST) each
No vote


1 item in stock
  • Description
  • Specifications
  • Post a comment

This drive comes with an EGODRIFT 4025HT Beta Series 550KV motor fitted.

New from Adverrun is the AVR XS V3. It features a more rigid structure to improve belt wear. It also has a new main gear design to reduce noise. The drive also features grub screws in both the pinion and small pulley. This makes maintenance easier.

The Adverrun AVR XS has been designed for 10S Lipo packs. The most common propeller combinations have been tested ranging from 20″ to 23″ diameter. Generally, it was found that higher pitch propellers perform a bit better and recommend using Front: 22×20 / Rear: 22×22. Depending on the chosen propeller, maximum current of 90-120A can be expected on the ground. This provides more power than required for a typical F3A flight.

Weight has always been a concern in F3A. Adverrun have been able to reduce the weight of the Adverrun AVR XS V3 drive. We list weight as span ranging from 475g if measured W/O accessories to 560g if spinner and accessories (i.e. screws and rubber mounts) are included. 

The Motor shaft is supported by a bearing in the front carbon fibre plate. Alloy screws are used to save weight where possible.

The Helical Delrin gear and belt drive require very little maintenance and limit noise.

Front and Rear mounting uses rubber isolator mounts to minimise noise transmission into the fuselage. The rear mount allows for small side thrust adjustments. 

A spare belt is included with the drive.

There are various options for spinners (not included in this listing). See related products below.

ESC Settings:

Poles: 10
Timing: 15°
Ratio: 4:1

Brand: AdverrunAdverrun
You must have bought this item in order to post a vote or a comment

Related products

AUD575.00 (AUD522.73 excl GST) each Adverrun 3B Sabre Blade Set
No vote
AUD55.00 (AUD50.00 excl GST) each EZO Bearing Set Adverrun XS V2/V3
No vote
AUD4,835.00 (AUD4,395.45 excl GST) each Proteus 3 Mono ARF
No vote
AUD171.60 (AUD156.00 excl GST) each Adverrun 82mm 3D Printed Spinner Set
No vote
AUD171.60 (AUD156.00 excl GST) each Adverrun 85mm 3D Printed Spinner Set
No vote
AUD255.00 (AUD231.82 excl GST) each Adverrun 82mm Spinner Set - Complete
No vote
AUD171.60 (AUD156.00 excl GST) each Adverrun 85mm 3B Spinner Set
No vote
AUD255.00 (AUD231.82 excl GST) each Adverrun 85mm Spinner Set - Complete
No vote
AUD275.00 (AUD250.00 excl GST) each Falcon 89mm CRS Spinner Set - Carbon Black
No vote
AUD275.00 (AUD250.00 excl GST) each Falcon 82mm CRS Spinner Set - Carbon Black
No vote
AUD295.00 (AUD268.18 excl GST) each Falcon 89mm CRS Spinner Set - White
No vote
Results 1 - 12 of 12
Precision Aero Products Pty Ltd.  ABN 34603116123

Like us on Facebook

Don't have enough time to put your model together? Perhaps our building services may be of interest to you? Contact us for a quote.