PowerBox Royal SR2 With Sensor Switch And TFT Display
PowerBox Royal SR2 With Sensor Switch And TFT Display
The PowerBox Royal SR2 sets new technical standards with a P² servo bus, 26 channels, a 12-axis gyro, and two pairs of regulators, all housed in a compact aluminum case with an integral heat sink. The full-color TFT screen displays all receiver and power supply data, and the bi-lingual menu system is easily understood even in direct sunlight.
Four independent P²-BUS interfaces support two different voltage levels, allowing standard 6V servos to be combined with high-performance HV types without additional regulator modules. The system includes an automatic servo-matching function, two integrated door sequencers, and optional iGyro SAT connectivity for advanced gyro functionality.
Key Features
| Brand | PowerBox |
| Product Type | Power Management System |
| Operating Voltage | 4.0V - 9.0V |
| Power Supply | 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH |
| Current Drain (Power-On) | 300mA (with TFT) |
| Current Drain (Standby) | 60µA |
| Maximum Load Current | Peak 4 x 20A |
| Drop-Out Voltage | 0.3V |
| Output Voltage | 6.0V, 7.4V, 7.8V, unregulated |
| Signal Input | Serial |
| Supported RC Systems | PowerBox, Futaba, MPX, Jeti, Spektrum, JR, Graupner |
| Receiver Redundancy | SRS |
| Channels | 26 |
| Servo Sockets | 26 |
| Programmable Servo Outputs | 26 |
| Servo Signal Resolution | 0.5µs |
| Signal Frame Rate | 10ms, 12ms, 14ms, 16ms, 18ms |
| Gyro Regulation | Heading- and Normalmode |
| Gyro Sensor Type | External iGyro SAT |
| Number of Sensor Axes | 12 |
| Screen | TFT 320x240 Pixel |
| Integral Door Sequencer | 2x |
| Supported Telemetry Systems | P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott, X.BUS |
| Dimensions | 5.35 x 3.23 x 0.71 in |
| Weight | 5.71 oz |
| Weight (Sensor Switch) | 0.53 oz |
| Weight (LCD Screen) | 1.20 oz |
| Temperature Range | -30°C to +105°C |
Highlights
- 26 channels
- High-performance battery backer with high continuous load capacity
- Four P²-BUS outputs with full telemetry support for servos
- 2.4" TFT screen, legible in sunlight
- Bi-lingual menu system
- Consistent duplication of all power electronics
- Redundant electronic switch
- Servo matching for all 26 outputs
- Auto matching function
- Two independent door sequencers with Setup Assistant
- Integrated iGyro technology, using the iGyro SAT as gyro sensor
- Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
- Individual gain control for all twelve gyro outputs
- Special regulatory algorithm for fixed-wing models
- System detects all transmitter mixers
- Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
- Two different voltage levels, separately adjustable for left and right side
- Graphic menu diagrams for programming
- Fast basic setup procedure using the Assistant
- Optional GPS III for speed-dependent gyro compensation
- Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link, JR DMSS and Graupner HoTT
- Transmission of battery, receiver and GPS data
- Features controllable from PowerBox and Jeti transmitters
- Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
- Servo feedback current suppression
- 32-bit micro-processor for precise, high-speed signal processing
- High-performance machined heat-sink for optimised heat diffusion
- Machined, anodised aluminium switch and screen case
- Compact dimension
Compatibility
Compatible with PowerBox, Futaba, MPX, Jeti, Spektrum, JR, and Graupner RC systems. Supports P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott, and X.BUS telemetry protocols. Works with 2S LiPo, 2S LiIon, 2S LiFePo, or 5S NiCd/NiMH batteries.
How to use
Connect the PowerBox Royal SR2 to your receiver and servos using the P²-BUS interfaces or standard PWM via the P²-ServoBridge. Configure settings through the TFT screen's bi-lingual menu or from a compatible PowerBox or Jeti transmitter. Use the Setup Assistant for fast basic configuration of servo matching and door sequencers.
What's included
- PowerBox Royal SR2
- TFT-Display
- SensorSwitch
- 2 three-core patch-leads, 180 mm
- 4 retaining screws
- 4 rubber grommets / brass spacer sleeves
- 4 brackets/covers
- Operating instructions in German and English
Downloads
Frequently asked questions
|